Features
-
Joint
Three tracks in a T
T piece of 172 × 103.5 × 18 mm with three track heads. Earth left or right tells along which side the earth conductor enters the branch; the connection diagram in the manual shows both.
-
Compatibility
For the A-Track 1-phase track
Made for the A-Track 1.5 m 1-Phase Track profile; it does not fit a 3-phase track or an A-Line track. Installation is shown in the manual of the A-Track 1-phase track system. IP20 and Class I: dry indoor areas, to be connected by a qualified electrician.
-
Version
Black, earth left, 172 × 103.5 × 18 mm
Plastic, black. 5-year warranty. The same connector comes in white.
Application
T connector for the A-Track 1-phase track, black, earth left
The T connector branches the run in three directions. Installation is shown in the manual of the A-Track 1-phase track system.
A 1-phase track has one 230V circuit: all spots on the run switch together. IP20 and Class I: dry indoor areas, to be connected by a qualified electrician.
In the box
Scope of supply, per unit.
Included
- Connector
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- L 172 × W 103.5 × H 18 mm
General & Mounting
- Mounts onto
- Track
- Indoor / outdoor
- Interior
- Appliance class
- Class I (earthed)
- IP rating
- IP20
Electrical & Safety
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Plastic
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
How do you install the A-Track 1-Phase T Connector?
The installation of the A-Track 1-Phase T Connector is shown in the manual of the A-Track 1-phase track system, also on this product page. The three track heads each slide into a track end and are screwed tight. Switch off the mains before starting; the connection is made by a qualified electrician.
What is in the box of the A-Track 1-Phase T Connector?
The A-Track 1-Phase T Connector itself. Tracks and spots are ordered separately. The A-Track 1-Phase T Connector connects to 230V, is IP20 and Class I: indoor use only.
Which version of the A-Track 1-Phase T Connector do you need?
It depends on the side on which the earth conductor enters the branch: left or right. The red line on the connection diagram in the manual shows the path of the earth conductor. Both versions are reversible: unscrew the cover and turn the T piece so that the earth conductor lies on the correct side.
Are the black and the white versions of the A-Track 1-Phase T Connector technically identical?
Yes. Both versions have the same dimensions and the same connection; only the colour differs.
Accessories
Parts that go with this fixture.
![[T01C315011B] A-Track 1.5 m 1-Phase Track profile (Black)](/web/image/product.product/161/image_128)
Documents
Datasheet and installation manual, free to download.