Features
-
Joint
Three tracks in a T
T piece of 166.1 × 100.7 × 35.5 mm with three track heads. Left or right is the direction of the branch, 1 or 2 the side of the earth conductor; the connection diagram in the manual shows where each version goes.
-
Compatibility
For the A-Track 3-phase track
Made for the A-Track 1.5 m 3-Phase Track profile; it does not fit a 1-phase track. Installation is shown in the manual of the A-Track 3-phase track system. IP20 and Class I: dry indoor areas, to be connected by a qualified electrician.
-
Version
Black, left 1, 166.1 × 100.7 × 35.5 mm
Plastic, black. 5-year warranty. The same connector comes in white.
Application
T connector for the A-Track 3-phase track, black, left 1
The T connector branches the run in three directions. Installation is shown in the manual of the A-Track 3-phase track system.
A 3-phase track has three 230V circuits (L1, L2 and L3 with a shared neutral): three groups of spots can be switched or dimmed separately. IP20 and Class I: dry indoor areas, to be connected by a qualified electrician.
In the box
Scope of supply, per unit.
Included
- Connector
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- L 166.1 × W 100.7 × H 35.5 mm
General & Mounting
- Mounts onto
- Track
- Indoor / outdoor
- Interior
- Appliance class
- Class I (earthed)
- IP rating
- IP20
Electrical & Safety
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Plastic
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
How do you install the A-Track 3-Phase T Connector?
The installation of the A-Track 3-Phase T Connector is shown in the manual of the A-Track 3-phase track system, also on this product page. The three track heads each slide into a track end and are screwed tight. Switch off the mains before starting; the connection is made by a qualified electrician.
What is in the box of the A-Track 3-Phase T Connector?
The A-Track 3-Phase T Connector itself. Tracks and spots are ordered separately. The A-Track 3-Phase T Connector connects to 230V, is IP20 and Class I: indoor use only.
Which version of the A-Track 3-Phase T Connector do you need?
Left or right is the direction of the branch, 1 or 2 the side on which the earth conductor runs. The four versions are not interchangeable; the red line on the connection diagram in the manual shows which goes where.
Are the black and the white versions of the A-Track 3-Phase T Connector technically identical?
Yes. Both versions have the same dimensions and the same connection; only the colour differs.
Accessories
Parts that go with this fixture.
Documents
Datasheet and installation manual, free to download.