Features
-
Connection
Mains connection at the track end
The feed-in slides into the track end with its key code matched to the track. L1, L2 and L3 take the three phases, neutral goes to N, earth to the earth clamp. The cable enters through the cable entry.
-
Compatibility
For the A-Track 3-phase track
Made for the A-Track 1.5 m 3-Phase Track profile; it does not fit a 1-phase track. Installation is shown in the manual of the A-Track 3-phase track system. Class I, for dry indoor areas, to be connected in line with the applicable wiring regulations.
-
Version
Black, left, 98.5 × 35.2 × 35.5 mm
Plastic, black. 5-year warranty. The same feed-in comes in white.
Application
Feed-in for the A-Track 3-phase track, black, left
The feed-in goes at the start of the run; feed each system at one point only. Installation is shown in the manual of the A-Track 3-phase track system.
A 3-phase track has three 230V circuits (L1, L2 and L3 with a shared neutral): three groups of spots can be switched or dimmed separately. Class I, for dry indoor areas, to be connected in line with the applicable wiring regulations.
In the box
Scope of supply, per unit.
Included
- Feed-in
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- L 98.5 × W 35.2 × H 35.5 mm
General & Mounting
- Mounts onto
- Track
- Indoor / outdoor
- Interior
- Appliance class
- Class I (earthed)
- IP rating
- IP20
Electrical & Safety
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Plastic
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
How do you install the A-Track 3-Phase Feed-in?
The installation of the A-Track 3-Phase Feed-in is shown in the manual of the A-Track 3-phase track system, also on this product page. The feed-in slides into the track end and is screwed tight; the wires then go to the terminals. Switch off the mains before starting; the connection must comply with the applicable wiring regulations.
What is in the box of the A-Track 3-Phase Feed-in?
The A-Track 3-Phase Feed-in itself. Tracks and spots are ordered separately. The A-Track 3-Phase Feed-in connects to 230V and is Class I; indoor use only.
Which version of the A-Track 3-Phase Feed-in do you need?
It depends on the side on which the earth conductor runs in the track. The left and right feed-ins have mirrored terminals (L1, L2, L3 and N) and a key code that must match the track; the connection diagram in the manual shows both.
Are the black and the white versions of the A-Track 3-Phase Feed-in technically identical?
Yes. Both versions have the same dimensions and the same connection; only the colour differs.
Accessories
Parts that go with this fixture.
Documents
Datasheet and installation manual, free to download.