Skip to Content

A-Track 3-Phase Feed-in Left Black

The A-Track 3-Phase Feed-in connects an A-Track 3-phase track to the mains at the track end, with terminals for L1, L2, L3, neutral and earth. Left or right follows the earth conductor.

9.90 € 9.90 € (Tax included)

The A-Track 3-Phase Feed-in connects an A-Track 3-phase track to the mains at the track end, with terminals for L1, L2, L3, neutral and earth. Left or right follows the earth conductor.

  • Color - Black
  • Power supply Type
5 year warranty
Free delivery in Belgium from €...
Under €...: €... shipping fee
Question about this product or project pricing? Contact us
Professional? Apply for a B2B account
In stock

Features

  • Connection

    Mains connection at the track end

    The feed-in slides into the track end with its key code matched to the track. L1, L2 and L3 take the three phases, neutral goes to N, earth to the earth clamp. The cable enters through the cable entry.

  • Compatibility

    For the A-Track 3-phase track

    Made for the A-Track 1.5 m 3-Phase Track profile; it does not fit a 1-phase track. Installation is shown in the manual of the A-Track 3-phase track system. Class I, for dry indoor areas, to be connected in line with the applicable wiring regulations.

  • Version

    Black, left, 98.5 × 35.2 × 35.5 mm

    Plastic, black. 5-year warranty. The same feed-in comes in white.

Application

Feed-in for the A-Track 3-phase track, black, left

The feed-in goes at the start of the run; feed each system at one point only. Installation is shown in the manual of the A-Track 3-phase track system.

A 3-phase track has three 230V circuits (L1, L2 and L3 with a shared neutral): three groups of spots can be switched or dimmed separately. Class I, for dry indoor areas, to be connected in line with the applicable wiring regulations.

In the box

Scope of supply, per unit.

Included

  • Feed-in

Specifications

Measurements are nominal. Check the dimensioned drawing before cutting.

Dimensions & Recessed Fit
Dimensioned drawing of the A-Track 3-Phase Feed-in
Dimensions
L 98.5 × W 35.2 × H 35.5 mm
General & Mounting
Mounts onto
Track
Indoor / outdoor
Interior
Appliance class
Class I (earthed)
IP rating
IP20
Electrical & Safety
Input voltage
230 V
Colour, Material & Finish
Colour
Black
Material
Plastic

Frequently asked questions

Questions we are regularly asked about this fixture and its variants.

How do you install the A-Track 3-Phase Feed-in?

The installation of the A-Track 3-Phase Feed-in is shown in the manual of the A-Track 3-phase track system, also on this product page. The feed-in slides into the track end and is screwed tight; the wires then go to the terminals. Switch off the mains before starting; the connection must comply with the applicable wiring regulations.

What is in the box of the A-Track 3-Phase Feed-in?

The A-Track 3-Phase Feed-in itself. Tracks and spots are ordered separately. The A-Track 3-Phase Feed-in connects to 230V and is Class I; indoor use only.

Which version of the A-Track 3-Phase Feed-in do you need?

It depends on the side on which the earth conductor runs in the track. The left and right feed-ins have mirrored terminals (L1, L2, L3 and N) and a key code that must match the track; the connection diagram in the manual shows both.

Are the black and the white versions of the A-Track 3-Phase Feed-in technically identical?

Yes. Both versions have the same dimensions and the same connection; only the colour differs.

Accessories

Parts that go with this fixture.

Documents

Datasheet and installation manual, free to download.