Features
-
Installation
Surface mounted on the wall, 100 × 100 mm mounting plate
Screw the mounting plate to the wall, connect it to the terminal block and slide the luminaire over it; small screws secure it. Class I, so a protective earth conductor is required.
-
Light source
One G9 socket, lamp not included
You choose the G9 LED lamp yourself; the Bloc is rated for a maximum of 20W. Light colour and dimming come from that lamp. The light leaves the luminaire at the top and at the bottom.
-
Finish
Black powder-coated aluminium, 100 × 100 × 100 mm
The luminaire is aluminium with a black powder coating. IP20, for dry indoor areas; the luminaire comes with a 5-year warranty.
Application
Aluminium wall light for dry indoor areas, Class I
IP20: the luminaire is intended for dry indoor areas, not for bathrooms and not for outdoor use. Class I is the check before installation: a protective earth conductor must be present. The luminaire must not be covered with thermal insulation.
The lamp is not in the box. One G9 LED lamp is enough, with a maximum load of 20W; that lamp determines the light colour and whether the assembly dims.
In the box
Scope of supply, per unit.
Included
- Fixture
- Mounting plate
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- H 10.0 × W 10.0 × D 10.0 cm
- Mounting plate dimensions
- L 100 × W 100 × D 100 mm
General & Mounting
- Indoor / outdoor
- Interior
- Fixation (method)
- Surface
- IP rating
- IP20
- Mounting (location)
- Wall
- Adjustability
- Fixed
- Appliance class
- Class I (earthed)
- Number of light points
- 1
Light
- Socket type
- G9
Electrical & Safety
- Dimmable
- Lightsource dependent
- Power source
- Mains (corded)
- Input voltage
- 230 V
- Dim technology
- Driver-dependent
Colour, Material & Finish
- Finish
- Powder coated
- Material
- Aluminium
- Colour
- Black
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Which lamp does the Bloc need?
One G9 LED lamp. The Bloc is rated for a maximum of 20W. The lamp is not included.
Is the Bloc dimmable?
That depends on the lamp. The Bloc has no driver of its own: with a dimmable G9 lamp and a suitable dimmer the assembly dims; with a non-dimmable lamp it does not.
Can the Bloc be used in a bathroom or outdoors?
No. The Bloc is IP20 and intended for dry indoor areas only.
Accessories
Parts that go with this fixture.
![[B04A0G9011W2] Noxion LED G9 3.2W](/web/image/product.product/9622/image_128)
Documents
Datasheet and installation manual, free to download.