Features
-
Version
Powder-coated aluminium in black
The luminaire is powder-coated aluminium in black. The white version has the same dimensions, the same GU10 sockets and the same mounting. 5-year warranty.
-
Installation
Surface mounted on the ceiling, footprint 160 × 80 mm
You take the base plate with the lampholders out of the housing, connect the mains cable to the terminal block and screw the housing to the ceiling with two screws. Then you fit the lamps in the lampholders and refit the base plate. No cut-out is needed; screws and plugs are in the box.
-
Lamp
Two GU10 sockets for 50 mm LED lamps (PAR16)
Two GU10 sockets, each for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Rated for a maximum of 35W per socket. The lamps are ordered separately; output, colour temperature and beam angle come with the lamps you choose. Dimming works with dimmable lamps and a matching dimmer.
Application
Chuck 2 Surface mounted downlight in black: fixed 160 × 80 × 90 mm housing, shining straight down
The housing is screwed directly to the ceiling; no cut-out is needed. The luminaire measures 160 × 80 × 90 mm and shines straight down.
It connects directly to 230V mains without a driver, rated IP20 and Class I: indoor and dry. Output, colour temperature and beam angle depend on the lamps you choose. The same model comes with one socket (80 mm): the Chuck 1.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- L 160 × W 80 mm
- Dimensions
- L 160 × W 80 × H 90 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Mounting (location)
- Ceiling
- Adjustability
- Fixed
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 2
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Which lamps are the Chuck 2 Surface mounted downlight made for?
The Chuck 2 Surface mounted downlight has two GU10 sockets, each for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. The lamps are ordered separately. Rated for a maximum of 35W per socket. The same model comes with one socket: the Chuck 1.
Can I use the Chuck 2 in a bathroom?
No. The Chuck 2 is rated IP20 and is for dry interiors only.
Does the Chuck 2 need a cut-out in the ceiling?
No. The Chuck 2 is a surface mounted luminaire: the 160 × 80 mm housing is screwed directly to the ceiling and connected to 230V mains. Screws and plugs are in the box.
Does the black Chuck 2 also come in white?
Yes. The Chuck 2 Surface mounted downlight also comes in white powder-coated aluminium, with the same dimensions (160 × 80 × 90 mm), the same two GU10 sockets and the same mounting.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.