Features
-
Surface mounted, Ø80 × 129 mm
The mounting plate is screwed to the ceiling and the cylinder twists onto it; no cut-out is needed. Below the ceiling the luminaire measures Ø80 × 129 mm: the spot's ring projects 9 mm below the cylinder. The cylinder holds the Clickfit Cave Medium IP54 recessed spotlight.
-
IP54, up to bathroom zone 2
A glass in front of the lamp protects against dust and splashing water. That makes the luminaire suitable for bathroom zone 2 and for sheltered outdoor areas. The Clickfit Cave Medium Surface mounted downlight, without glass, is intended for dry indoor spaces.
-
Powder-coated aluminium in black
GU10 socket for one LED lamp with a 50 mm reflector diameter — the size the trade calls PAR16 — or an LED module, up to 35W; neither is supplied. Cylinder and spot are powder-coated aluminium: cylinder and spot in black. Cylinder in black or white, spot in black or white. 5-year warranty.
Application
IP54 GU10 surface mounted downlight, Ø80 × 129 mm, black
IP54 means protected against dust and against splashing water from any direction; the glass in front of the lamp makes that possible. That is sufficient for bathroom zone 2 and for a sheltered outdoor area. Above the bath or shower rim, zone 1 applies with a stricter requirement; check that against the local wiring rules before you install.
The luminaire consists of the Clickfit Cylinder Medium and the Clickfit Cave Medium IP54 recessed spotlight: the mounting plate is screwed to the ceiling, the cylinder twists onto it and the spot is held in the cylinder by leaf springs. The GU10 socket is designed for a 50 mm LED lamp or an LED module, not supplied, so you choose the colour temperature and beam angle yourself. Rated for a maximum of 35W.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting plate
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- Ø80 × H 129 mm
General & Mounting
- Indoor / outdoor
- Interior, Exterior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class II (double insulated)
- Mounting (location)
- Ceiling
- Adjustability
- Fixed
- Fixation (method)
- Surface
- IP rating
- IP54
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Which light sources are compatible, and are they included?
The Clickfit Cave Medium IP54 Surface mounted downlight has a GU10 socket for one LED lamp with a 50 mm reflector diameter, the size the trade calls PAR16, or for an LED module. Both click into the luminaire. The light source is not supplied. The luminaire is rated for a maximum of 35W, so lumen output, colour temperature, beam angle and dimmability depend on the light source you choose. In a damp room, pick a lamp rated for it.
What parts make up the Clickfit Cave Medium IP54 Surface mounted downlight?
The Clickfit Cylinder Medium, a Ø80 × 120 mm aluminium surface mount housing, and the Clickfit Cave Medium IP54 recessed spotlight. The mounting plate is screwed to the ceiling, the cylinder twists onto it, and the spot is held in the cylinder by its leaf springs. Both parts are also sold separately.
Where may this luminaire be installed?
The Clickfit Cave Medium IP54 Surface mounted downlight has a glass in front of the lamp and is protected against dust and against splashing water from any direction. That makes it suitable for bathroom zone 2 and for sheltered outdoor areas. Above the bath or shower rim, zone 1 applies with a stricter requirement — check that against the local wiring rules before you install.
Does the black version differ technically from the other combinations?
No. Dimensions, socket, IP54 and Class II are identical; only the colour of the cylinder and of the spot differs, and the price is the same. Cylinder in black or white, spot in black or white.
Accessories
Parts that go with this fixture.
![[M01A023011B2] Zenkai 230V LED Module (2700K)](/web/image/product.product/473/image_128)
![[M01A024011B2] Zenkai 24V LED Module (2700K)](/web/image/product.product/475/image_128)
![[M01A035011B2] Zenkai 350mA LED Module (2700K)](/web/image/product.product/477/image_128)
![[M01A050011B2] Zenkai 500mA LED Module (2700K)](/web/image/product.product/479/image_128)
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.