Features
-
IP54, up to bathroom zone 2
Protected against dust and splashing water. That makes the spotlight suitable for bathroom zone 2 and for sheltered outdoor areas. The IP20 version of the same spotlight is intended for dry indoor spaces.
-
Ø45-47 mm cut-out, 90 mm recess depth
For a Ø45-47 mm cut-out. Leaf springs hold the spotlight behind a solid or hollow ceiling board. Recess depth 90 mm, including the lamp. Below the ceiling Ø55 × 26 mm remains visible.
-
GU10 socket in powder-coated aluminium, black
GU10 socket for one LED lamp with a 35 mm reflector diameter — the size the trade calls MR11 — or an LED module, up to 35W. The light source is not supplied and clicks into the luminaire from below. Housing in black powder-coated aluminium; also available entirely in white. 5-year warranty.
Application
IP54 GU10 recessed spotlight, Ø45-47 mm cut-out, black
IP54 means protected against dust and against splashing water from any direction. That is sufficient for bathroom zone 2 and for a sheltered outdoor area. Above the bath or shower rim, zone 1 applies with a stricter requirement; check that against the local wiring rules before you install.
The luminaire connects directly to 230V mains, without a driver, and is Class II. The GU10 socket is designed for a 35 mm LED lamp or an LED module, up to 35W (neither supplied). Do not cover the luminaire with insulation.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Spring clips
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Recessed diameter
- Ø45-47 mm
- Dimensions
- Ø55 × H 26 mm
- Recessed depth
- 90 mm
General & Mounting
- Spring type
- Leaf springs
- Indoor / outdoor
- Interior, Exterior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class II (double insulated)
- Mounting (location)
- Ceiling
- Adjustability
- Fixed
- Fixation (method)
- Recessed
- Ceiling type
- Solid (concrete), Hollow (plasterboard)
- IP rating
- IP54
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- MR11
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Where may this spotlight be installed?
IP54 protects against dust and against splashing water from any direction. That makes the spotlight suitable for bathroom zone 2 and for sheltered outdoor areas. Above the bath or shower rim, zone 1 applies with a stricter requirement — check that against the local wiring rules before you install.
Which light sources are compatible, and are they included?
One GU10 LED lamp with a 35 mm reflector diameter, the size the trade calls MR11, or an LED module. Both click into the luminaire. The light source is not supplied. The luminaire is rated for a maximum of 35W, so lumen output, colour temperature, beam angle and dimmability depend on the light source you choose. In a damp room, pick a lamp rated for it.
How much recess depth do I need?
90 mm, measured with the lamp fitted. The cut-out is Ø45-47 mm and leaf springs hold the spotlight behind a solid or hollow ceiling board. Below the ceiling Ø55 × 26 mm remains visible. The same dimensions as the IP20 version.
Does the black version differ technically from the white one?
No. Dimensions, cut-out, socket, leaf springs, IP54 and protection class II are identical; only the powder coating differs, and the price is the same. Against a light ceiling the black rim stands out, the white one blends in.
Accessories
Parts that go with this fixture.
![[M01A035M11B2] Zenkai Mini 350mA LED Module (2700K)](/web/image/product.product/481/image_128)
![[B03A0GU111W2] Osram LED Superstar Reflector Spot GU10 MR11 3W](/web/image/product.product/7327/image_128)
Documents
Datasheet and installation manual, free to download.