Features
-
Ø92 mm cut-out, plastered in
For a Ø92 mm cut-out, in a solid or hollow ceiling; in a hollow ceiling the board is at most 20 mm thick. The spotlight is plastered in and has no visible trim. It is 35 mm high; the recess depth depends on the light source you choose.
-
IP20, 230V, Class II
For dry indoor spaces. The luminaire connects directly to 230V mains, without a driver; Class II, so no earth connection is needed.
-
GU10 socket, black
GU10 socket for one LED lamp with a 50 mm reflector diameter — the size the trade calls PAR16 — or an LED module, up to 35W. The light source is not supplied and clicks into the luminaire from below. Interior in black; also available in white. 5-year warranty.
Application
Trimless GU10 recessed spotlight, Ø92 mm cut-out, black
The Clickfit Trimless is IP20, for dry indoor spaces, and connects directly to 230V mains without a driver. Class II, so no earth connection is needed. It is plastered into a solid or hollow ceiling; in a hollow ceiling the board is at most 20 mm thick.
The GU10 socket is designed for a 50 mm LED lamp or an LED module, not supplied, so you choose the colour temperature and beam angle yourself. Rated for a maximum of 35W. The recess depth depends on the light source you choose. Do not cover the luminaire with insulation.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Recessed diameter
- Ø92 mm
- Dimensions
- Ø66 × H 35 mm
- Recessed thickness (max)
- 20 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class II (double insulated)
- Mounting (location)
- Ceiling
- Adjustability
- Fixed
- Fixation (method)
- Recessed
- Ceiling type
- Solid (concrete), Hollow (plasterboard)
- IP rating
- IP20
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Which light sources are compatible, and are they included?
The Clickfit Trimless has a GU10 socket for one LED lamp with a 50 mm reflector diameter, the size the trade calls PAR16, or for an LED module. Both click into the luminaire. The light source is not supplied. The luminaire is rated for a maximum of 35W, so lumen output, colour temperature, beam angle and dimmability depend on the light source you choose.
How is the Clickfit Trimless installed?
The Clickfit Trimless is fitted into a Ø92 mm cut-out and is then plastered in, so no trim remains visible. It is suitable for a solid and for a hollow ceiling; in a hollow ceiling the board is at most 20 mm thick. The spotlight itself is 35 mm high; the recess depth depends on your choice of a GU10 lamp or an LED module, so there is no fixed figure.
Can this spotlight be used in a bathroom?
The Clickfit Trimless is IP20 and therefore intended for dry indoor spaces. For bathroom zone 2, the IP54 versions of the Clickfit Smooth and Deep are available, with a glass in front of the lamp.
Does the black version differ technically from the white one?
No. Dimensions, cut-out, socket, IP20 and Class II are identical; only the colour of the interior differs, and the price is the same. The Clickfit Trimless is also available in white.
Accessories
Parts that go with this fixture.
Documents
Datasheet and installation manual, free to download.