Features
-
Version
Aluminium in black
The luminaire is aluminium in black. Against a dark ceiling the luminaire stands out less. The white version has the same dimensions, the same GU10 socket and the same mounting. 5-year warranty.
-
Installation
Surface mounted on the ceiling, bar 336 × 32 × 30 mm
You screw the bar straight onto the ceiling; no cut-out is needed. The bar is 30 mm thick and the luminaire 142 mm high. Each spot turns and tilts on its own. Fixings and the manual are in the box.
-
Lamp
Two GU10 sockets for 50 mm LED lamps (PAR16)
Two GU10 sockets, each for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. The lamps are ordered separately; output, colour temperature and beam angle come with the lamps you choose. Dimming works with dimmable lamps and a matching dimmer.
Application
Connor 2 Surface-mounted spotlight in black: two adjustable spots, bar L 336 × W 32 mm, 142 mm high
You screw the bar straight onto the ceiling; no cut-out is needed. The bar is 30 mm thick and the luminaire 142 mm high. Each spot turns and tilts on its own.
It connects to 230V without a driver, rated IP20 and Class I: indoor and dry. What the lamp delivers in output, colour temperature and beam angle is not set by the luminaire. The same bar comes with one spot (175 mm) and with three spots (560 mm).
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- L 336 × W 32 × D 30 mm
- Dimensions
- L 336 × W 32 × H 142 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Mounting (location)
- Ceiling
- Adjustability
- Adjustable
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 2
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
What lamp does the Connor 2 Surface-mounted spotlight take?
The Connor 2 Surface-mounted spotlight takes two GU10 lamps, ordered separately: LED lamps with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. The same bar comes with one spot (175 mm) and with three spots (560 mm).
How high does the Connor 2 Surface-mounted spotlight sit below the ceiling?
142 mm in total, measured from the ceiling plane. The bar of the Connor 2 Surface-mounted spotlight is 336 mm long, 32 mm wide and 30 mm thick; the spot measures Ø60 mm.
Does the black Connor 2 Surface-mounted spotlight give less light than the white one?
No. On the Connor 2 Surface-mounted spotlight the light comes from the GU10 lamps you choose. The colour of the luminaire does not change the output: black and white give the same values with the same lamps. Black stands out less against a dark ceiling.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
![[03A99019B] Honeycomb Connor/Tuup](/web/image/product.product/7329/image_128)
![[03A99018B] Connor Insert (Black)](/web/image/product.product/520/image_128)
Documents
Datasheet and installation manual, free to download.
Alternative Products
These other products might interest you