Features
-
Version
Aluminium in black
The luminaire is aluminium in black. Against a dark ceiling the luminaire stands out less. The white version has the same dimensions, the same GU10 socket and the same mounting. 5-year warranty.
-
Installation
Surface mounted on the ceiling, rose Ø60 × 25 mm
You screw the mounting plate of the rose to the ceiling, connect and fit the rose; no cut-out is needed. The rose measures Ø60 × 25 mm and the luminaire is 134 mm high. The spot turns and tilts. Fixings and the manual are in the box.
-
Lamp
GU10 socket for a 50 mm LED lamp (PAR16)
One GU10 socket, for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W. The lamp is ordered separately; output, colour temperature and beam angle come with the lamp you choose. Dimming works with a dimmable lamp and a matching dimmer.
Application
Connor Adjustable Surface-mounted spotlight in black: adjustable spot on a Ø60 mm rose, 134 mm high
You screw the mounting plate of the rose to the ceiling, connect and fit the rose; no cut-out is needed. The rose measures Ø60 × 25 mm and the luminaire is 134 mm high. The spot turns and tilts.
It connects to 230V without a driver, rated IP20 and Class I: indoor and dry. What the lamp delivers in output, colour temperature and beam angle is not set by the luminaire. If the spot does not need aiming, there is the Connor Fix: a fixed Ø60 × 105 mm cylinder.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- Ø60 × D 25 mm
- Dimensions
- Ø60 × H 134 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Mounting (location)
- Ceiling
- Adjustability
- Adjustable
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
What lamp does the Connor Adjustable Surface-mounted spotlight take?
The Connor Adjustable Surface-mounted spotlight has a GU10 socket for one lamp, ordered separately: an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. If the spot does not need aiming, there is the Connor Fix: a fixed Ø60 × 105 mm cylinder.
How high does the Connor Adjustable sit below the ceiling?
134 mm in total, measured from the ceiling plane: the Ø60 × 25 mm rose with the Ø60 mm spot below it. The spot turns and tilts, so the beam is aimed once the luminaire is in place.
Does the black Connor Adjustable Surface-mounted spotlight give less light than the white one?
No. On the Connor Adjustable Surface-mounted spotlight the light comes from the GU10 lamp you choose. The colour of the luminaire does not change the output: black and white give the same values with the same lamp. Black stands out less against a dark ceiling.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
![[03A99019B] Honeycomb Connor/Tuup](/web/image/product.product/7329/image_128)
![[03A99018B] Connor Insert (Black)](/web/image/product.product/520/image_128)
Documents
Datasheet and installation manual, free to download.
Alternative Products
These other products might interest you