Features
-
Version
Aluminium in black
The luminaire is aluminium in black. Against a dark wall the luminaire stands out less. The white version has the same dimensions, the same GU10 socket and the same mounting. 5-year warranty.
-
Installation
Surface mounted on the wall, 80 mm projection
You screw the mounting bracket to the wall, connect and fit the luminaire onto it. The cylinder measures Ø60 × 220 mm and projects 80 mm from the wall. Bracket, fixings and the manual are in the box.
-
Lamp
Two GU10 sockets for 50 mm LED lamps (PAR16)
Two GU10 sockets, each for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. The lamps are ordered separately; output, colour temperature and beam angle come with the lamps you choose. Dimming works with dimmable lamps and a matching dimmer.
Application
Connor Up & Down Wall light in black: up and down light, Ø60 × 220 mm, 80 mm projection
You screw the mounting bracket to the wall, connect and fit the luminaire onto it. The cylinder measures Ø60 × 220 mm and projects 80 mm from the wall.
It connects to 230V without a driver; Class I, for dry indoor use. What the lamp delivers in output, colour temperature and beam angle is not set by the luminaire.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting bracket
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- L 78 × W 40 × D 20 mm
- Dimensions
- Ø60 × H 220 × D 80 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Mounting (location)
- Wall
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 2
- Adjustability
- Fixed
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
What lamp does the Connor Up & Down Wall light take?
The Connor Up & Down takes two GU10 lamps, one facing up and one facing down, ordered separately: LED lamps with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket.
How far does the Connor Up & Down project from the wall?
80 mm. The cylinder measures Ø60 × 220 mm and sits on a mounting bracket that is screwed to the wall first. The Connor Up & Down is for dry interiors.
Does the black Connor Up & Down Wall light give less light than the white one?
No. On the Connor Up & Down Wall light the light comes from the GU10 lamps you choose. The colour of the luminaire does not change the output: black and white give the same values with the same lamps. Black stands out less against a dark wall.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
![[03A99019B] Honeycomb Connor/Tuup](/web/image/product.product/7329/image_128)
![[03A99018B] Insert Connor/Tuup (Black)](/web/image/product.product/520/image_128)
Documents
Datasheet and installation manual, free to download.