Features
-
Version
Aluminium in black
The luminaire is aluminium in black. Against a dark wall the luminaire stands out less. The white version has the same dimensions, the same GU10 socket and the same mounting. 5-year warranty.
-
Installation
Surface mounted on the wall, 80 mm projection
You screw the mounting bracket to the wall, connect and fit the luminaire onto it. The cylinder measures Ø60 × 220 mm and projects 80 mm from the wall. Bracket, fixings and the manual are in the box.
-
Lamp
Two GU10 sockets for 50 mm LED lamps (PAR16)
Two GU10 sockets, each for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. The lamps are ordered separately; output, colour temperature and beam angle come with the lamps you choose. Dimming works with dimmable lamps and a matching dimmer.
Application
Connor Up & Down Wall light in black: up and down light, Ø60 × 220 mm, 80 mm projection
You screw the mounting bracket to the wall, connect and fit the luminaire onto it. The cylinder measures Ø60 × 220 mm and projects 80 mm from the wall.
It connects to 230V without a driver, rated IP20 and Class I: indoor and dry. What the lamp delivers in output, colour temperature and beam angle is not set by the luminaire.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting bracket
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- L 78 × W 40 × D 20 mm
- Dimensions
- Ø60 × H 220 × D 80 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Mounting (location)
- Wall
- Adjustability
- Fixed
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 2
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
What lamp does the Connor Up & Down Wall light take?
The Connor Up & Down takes two GU10 lamps, one facing up and one facing down, ordered separately: LED lamps with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket.
How far does the Connor Up & Down project from the wall?
80 mm. The cylinder measures Ø60 × 220 mm and sits on a mounting bracket that is screwed to the wall first. The Connor Up & Down is rated IP20, for dry interiors.
Does the black Connor Up & Down Wall light give less light than the white one?
No. On the Connor Up & Down Wall light the light comes from the GU10 lamps you choose. The colour of the luminaire does not change the output: black and white give the same values with the same lamps. Black stands out less against a dark wall.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
![[03A99019B] Honeycomb Connor/Tuup](/web/image/product.product/7329/image_128)
![[03A99018B] Connor Insert (Black)](/web/image/product.product/520/image_128)
Documents
Datasheet and installation manual, free to download.