Features
-
Installation
Surface mounted on the wall, 93 mm projection
The mounting plate comes loose in the box and is screwed to the wall first; the body then slides onto it. Drilling centres 39 × 51 mm, drill Ø6 mm. Class I, so a protective earth conductor is required.
-
Light source
One GU10 socket, lamp not included
You choose the LED lamp yourself: up to 11W, with a 50 mm reflector diameter — the size the trade calls PAR16. Light colour, beam angle and dimming come from that lamp, not from the luminaire.
-
Outdoor use
IP65, indoor and outdoor
IP65 means dust-tight and resistant to water jets from any direction. The housing is powder-coated aluminium; the wall light carries a 5-year warranty.
Application
Wall light with one GU10 socket, for indoor and outdoor use
Rated IP65, the Cube Down is protected against dust and water jets from any direction: it can be used outdoors, and indoors in bathrooms too. The luminaire is Class I and must therefore be connected to earth. You choose the GU10 LED lamp yourself, up to 11W; it determines the colour temperature, the beam and whether you can dim. The lamp is not included.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting bracket
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- H 8.0 × W 6.8 × D 9.3 cm
- Mounting plate dimensions
- L 80 × W 68 mm
General & Mounting
- Article number
- 11W3D0021B0
- Indoor / outdoor
- Interior, Exterior
- Fixation (method)
- Surface
- IP rating
- IP65
- Mounting (location)
- Wall
- Adjustability
- Fixed
- Appliance class
- Class I (earthed)
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dimmable
- Lightsource dependent
- Power source
- Mains (corded)
- Input voltage
- 230 V
Colour, Material & Finish
- Finish
- Powder coated
- Material
- Aluminium
- Colour
- Black
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Can this wall light be installed outdoors?
Yes. The wall light is IP65: dust-tight and resistant to water jets from any direction, and it is intended for both indoor and outdoor use. Note the protection class: Class I requires a protective earth conductor at the connection.
Which lamp do I need?
One GU10 LED lamp with a 50 mm reflector diameter — the size the trade calls PAR16 — of up to 11W. The lamp is not included.
Is this wall light dimmable?
That depends on the lamp. The wall light has no driver of its own: with a dimmable GU10 lamp and a suitable dimmer the assembly dims; with a non-dimmable lamp it does not.
What are the drilling centres?
39 × 51 mm, with a Ø6 mm drill. The mounting plate comes loose in the box and is screwed on first; the body then slides onto it.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W LED lamp (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.