Features
-
Installation
Surface mounted on the wall, 93 mm projection
The mounting plate comes loose in the box and is screwed to the wall first; the body then slides onto it. Drilling centres 39 × 51 mm, drill Ø6 mm. Class I, so a protective earth conductor is required.
-
Light source
One GU10 socket, lamp not included
You choose the LED lamp yourself: up to 11W, with a 50 mm reflector diameter — the size the trade calls PAR16. Light colour, beam angle and dimming come from that lamp, not from the luminaire.
-
Version
Rounded front, IP65, indoor and outdoor
The same housing as the square Down, but with a rounded front. IP65 means dust-tight and resistant to water jets from any direction; the wall light carries a 5-year warranty.
Application
IP65 and Class I, for indoor and outdoor use
IP65 covers dust and water jets from any direction. That specifies the wall light for outdoor positions as well as indoor areas exposed to splashing. Class I is the check before installation: a protective earth conductor must be present.
The lamp is not in the box. One GU10 lamp of up to 11W is enough; that lamp determines the light colour, the beam and whether the assembly dims.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting bracket
- Mounting hardware
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- H 8.0 × W 6.8 × D 9.3 cm
- Mounting plate dimensions
- L 80 × W 68 mm
General & Mounting
- Indoor / outdoor
- Interior, Exterior
- Fixation (method)
- Surface
- IP rating
- IP65
- Mounting (location)
- Wall
- Adjustability
- Fixed
- Appliance class
- Class I (earthed)
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dimmable
- Lightsource dependent
- Power source
- Mains (corded)
- Input voltage
- 230 V
Colour, Material & Finish
- Finish
- Powder coated
- Material
- Aluminium
- Colour
- Black
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Can this wall light be installed outdoors?
Yes. The wall light is IP65: dust-tight and resistant to water jets from any direction, and it is intended for both indoor and outdoor use. Note the protection class: Class I requires a protective earth conductor at the connection.
Which lamp do I need?
One GU10 LED lamp with a 50 mm reflector diameter — the size the trade calls PAR16 — of up to 11W. The lamp is not included.
Is this wall light dimmable?
That depends on the lamp. The wall light has no driver of its own: with a dimmable GU10 lamp and a suitable dimmer the assembly dims; with a non-dimmable lamp it does not.
How does this differ from the square Cube Down?
Only the front: rounded here instead of square. Dimensions, GU10 socket, IP65 and protection class are the same, and the drilling centres stay 39 × 51 mm with a Ø6 mm drill.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.