Features
-
Installation
Ø76 mm cut-out, torsion springs
Clamps into hollow ceilings; 105 mm free recess depth required above the cut-out.
-
Light source
GU10 up to 50W, not included
Choose colour temperature and beam angle per project; the socket is fixed, the lamp is not.
-
Maintenance
Lamp replaceable from the front
The lamp holder stays accessible without dismantling. Powder-coated aluminium in black, class II, IP20.
Application
For hollow ceilings with 105 mm of free recess depth
For hollow ceilings with at least 105 mm of free space above the Ø76 mm cut-out. The torsion springs clamp across a wide plate-thickness range, so the spotlight fits plasterboard and suspended ceilings. The black version is specified for dark ceiling finishes and where less view of the light source is wanted. The lamp holder stays accessible from the front, so replacement happens without removing the spotlight from the ceiling. The GU10 socket lets you choose colour temperature and beam angle per project.
In the box
Scope of supply, per unit.
Included
- Fixture
- Spring clips
- Lamp holder
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Recessed diameter
- Ø76 mm
- Dimensions
- Ø85 × H 82 mm
- Recessed depth
- 105 mm
General & Mounting
- Spring type
- Torsion springs
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class II (double insulated)
- Mounting (location)
- Ceiling
- Adjustability
- Fixed
- Fixation (method)
- Recessed
- Ceiling type
- Hollow (plasterboard)
- IP rating
- IP20
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Which light source fits the Djup?
Any GU10 bulb with a Ø50 mm diameter, up to 50W at 230V. The light source is not included.
What is the cut-out size and how much space do I need?
Ø76 mm cut-out, with 105 mm of free recess depth above it. The outer diameter of the spotlight is Ø85 mm.
Is the Djup dimmable?
That depends on the GU10 bulb and the dimmer you choose — the spotlight itself imposes nothing.
Can I mix the different versions in the same ceiling?
Yes. All versions have a Ø76 mm cut-out and 105 mm recess depth, so the ceiling preparation is identical.
Does the black version give less light?
No. Light output comes entirely from the GU10 lamp; the spotlight colour does not change the photometry.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.
Alternative Products
These other products might interest you