Features
-
Version
Powder-coated aluminium in black
The luminaire is powder-coated aluminium in black. Against a dark ceiling the luminaire stands out less. The white version has the same dimensions, the same GU10 socket and the same mounting. 5-year warranty.
-
Installation
Surface mounted on the ceiling, 305 × 90 mm
You screw the mounting bracket to the ceiling and fix the luminaire onto it; no cut-out is needed. The luminaire is 305 × 90 mm and 110 mm high. Each spot turns and tilts separately. Mounting bracket, fixings, hex key, suction cup and the manual are in the box.
-
Lamp
Two GU10 sockets for 50 mm LED lamps (PAR16)
Two GU10 sockets, each for an LED lamp with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. The lamps are ordered separately; output, colour temperature and beam angle come with the lamp you choose. Dimming works with dimmable lamps and a matching dimmer.
Application
Kona 2 Surface-mounted spotlight in black: two adjustable spots, L 305 × W 90 mm, 110 mm high
You screw the mounting bracket to the ceiling and fix the luminaire onto it; no cut-out is needed. The luminaire is 305 × 90 mm and 110 mm high. Each spot turns and tilts separately.
It connects to 230V without a driver, rated IP20 and Class I: indoor and dry. What the lamps deliver in output, colour temperature and beam angle is not set by the luminaire. Kona also comes with one spot (110 mm) and with three spots (480 mm).
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Mounting bracket
- Mounting hardware
- Manual
- Hex key
- Suction cup
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- L 305 × W 90 mm
- Dimensions
- L 305 × W 90 × H 110 mm
General & Mounting
- Indoor / outdoor
- Interior
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Mounting (location)
- Ceiling
- Adjustability
- Adjustable
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 2
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dim technology
- Driver-dependent
- Power source
- Mains (corded)
- Dimmable
- Lightsource dependent
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
What lamp does the Kona 2 Surface-mounted spotlight take?
The Kona 2 Surface-mounted spotlight takes two GU10 lamps, ordered separately: LED lamps with a 50 mm reflector — the size the trade calls PAR16. Maximum load 7.5W per socket. Kona also comes with one spot (110 mm) and with three spots (480 mm).
How high does the Kona 2 Surface-mounted spotlight sit below the ceiling?
110 mm in total, measured from the ceiling plane. The Kona 2 Surface-mounted spotlight is 305 mm long and 90 mm wide; each spot measures Ø56 × 76 mm.
Does the black Kona 2 Surface-mounted spotlight give less light than the white one?
No. On the Kona 2 Surface-mounted spotlight the light comes from the GU10 lamps you choose. The colour of the luminaire does not change the output: black and white give the same values with the same lamp. Black stands out less against a dark ceiling.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W GU10 (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.
Alternative Products
These other products might interest you