Features
-
Installation
Ø83 × 150 mm mounting sleeve included
Set the mounting sleeve flush with the ground on a gravel drainage layer, connect the luminaire and place it in the sleeve. The connection cable is 0.5 m long (H05RN-F 3 × 1.0 mm²). Class I, so a protective earth conductor is required.
-
Light source
One GU10 socket, lamp not included
You choose the GU10 LED lamp yourself: up to 7.5W, with a 50 mm reflector diameter — the size the trade calls PAR16. Light colour, beam angle and dimming come from that lamp, not from the luminaire.
-
Finish
316L stainless steel ring, IP67 and IK10
The Ø85 mm ring is 316L stainless steel, the housing powder-coated aluminium. IP67: dust-tight and protected against temporary immersion. IK10, with a maximum load of 783 kg and a 5-year warranty.
Application
In-ground light for outdoor use, IP67, IK10 and Class I
The Ronda is intended for outdoor use, installed in the ground: IP67 means dust-tight and protected against temporary immersion, and the luminaire is IK10 with a maximum load of 783 kg. Set the mounting sleeve on a gravel drainage layer. Class I: check before installation that a protective earth conductor is present.
The lamp is not in the box. One GU10 LED lamp of up to 7.5W is enough; that lamp determines the light colour, the beam and whether the assembly dims.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
- Recessed housing
- Manual
Not included
- Light source
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Recessed depth
- 150 mm
- Cord length
- 500 mm
- Dimensions
- Ø85 × H 103 mm
- Recessed diameter
- Ø83 mm
General & Mounting
- Indoor / outdoor
- Exterior
- Fixation (method)
- Recessed
- IP rating
- IP67
- Mounting (location)
- Ground
- Adjustability
- Fixed
- Serviceability
- Front access – relamping from below
- Appliance class
- Class I (earthed)
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dimmable
- Lightsource dependent
- Power source
- Mains (corded)
- Input voltage
- 230 V
- Dim technology
- Driver-dependent
Colour, Material & Finish
- Material
- Steel
- Colour
- Silver
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Where can the Ronda be installed?
Outdoors, installed in the ground. The Ronda is an IP67 ground light: dust-tight and protected against temporary immersion. It is not intended for indoor use.
Which lamp does the Ronda need?
One GU10 LED lamp of up to 7.5W, with a 50 mm reflector diameter — the size the trade calls PAR16. The lamp is not included with the Ronda.
How is the Ronda installed?
The Ronda comes with a Ø83 × 150 mm mounting sleeve, which is set flush with the ground on a gravel drainage layer. The luminaire is then connected via its 0.5 m connection cable and placed in the sleeve.
What load can the Ronda take?
The Ronda has a maximum load of 783 kg and an impact rating of IK10.
Is the Ronda dimmable?
That depends on the lamp. The Ronda has no driver of its own: with a dimmable GU10 lamp and a suitable dimmer the assembly dims; with a non-dimmable lamp it does not.
Accessories
Parts that go with this fixture.
![[B02A0GU111W2] Philips CorePro LEDspot 4W LED lamp (2700K)](/web/image/product.product/274/image_128)
Documents
Datasheet and installation manual, free to download.