Features
-
Light source
GU10 socket, LED lamp not included
The lampholder is mounted on a lead and is meant for a GU10 LED lamp with a 50 mm reflector diameter, the size sold as PAR16. The lamp is ordered separately.
-
Connection
230V, Class II
The spotlight connects directly to 230V mains, without a driver. Dimmable if the chosen LED lamp is dimmable. Class II, for dry indoor spaces.
-
Installation
In a Sleekfit mounting kit, Ø92 mm cut-out
The Sleekfit Rim mounting kit leaves a visible Ø100 mm trim; the Sleekfit Trimless mounting kit is plastered in without a trim. Both need a Ø92 mm cut-out and are ordered separately.
Application
GU10 recessed light for dry indoor spaces, in a Sleekfit mounting kit
The Sleekfit Retro GU10 is intended for dry indoor spaces. Light colour, output and beam come from the GU10 LED lamp you choose.
The spotlight connects directly to 230V mains and is fitted in a Sleekfit Rim or Trimless mounting kit, Ø92 mm cut-out. Lamp and kit are not included.
In the box
Scope of supply, per unit.
Included
- Fixture
- Lamp holder
Not included
- Light source
- Recessed housing
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Recessed depth
- 45 mm
- Dimensions
- Ø69.5 × H 45 mm
- Recessed diameter
- Ø92 mm
General & Mounting
- Indoor / outdoor
- Interior
- Fixation (method)
- Recessed
- IP rating
- IP20
- Mounting (location)
- Ceiling
- Ceiling type
- Solid (concrete), Hollow (plasterboard)
- Adjustability
- Fixed
- Serviceability
- Front access – relamping from below
- Appliance class
- Class II (double insulated)
- Number of light points
- 1
Light
- Socket type
- GU10
- Light source
- PAR16
Electrical & Safety
- Dimmable
- Lightsource dependent
- Power source
- Mains (corded)
- Input voltage
- 230 V
- Dim technology
- Driver-dependent
Colour, Material & Finish
- Colour
- White
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
Which lamp fits the Sleekfit Retro GU10?
The Sleekfit Retro GU10 has a GU10 socket for one LED lamp with a 50 mm reflector diameter, the size sold as PAR16. The lamp is not included.
Which mounting kit does the Sleekfit Retro GU10 need?
The Sleekfit Retro GU10 is always fitted in a Sleekfit mounting kit: the Rim kit with a visible Ø100 mm trim, or the Trimless kit, which is plastered in without a trim. Both need a Ø92 mm cut-out and are not included.
Accessories
Parts that go with this fixture.
![[26C1R0011W2] Sleekfit Rim Mounting kit](/web/image/product.product/436/image_128)
![[B02A0GU111W2] Philips CorePro LEDspot 4W LED lamp (2700K)](/web/image/product.product/274/image_128)
![[26C1TR011W2] Sleekfit Trimless Mounting kit](/web/image/product.product/439/image_128)
Documents
Datasheet and installation manual, free to download.
-
Download
Datasheet