Features
-
Installation
Recessed in a hollow wall, 248 × 113 mm cut-out
Cut a 248 × 113 mm opening in a wall 9 to 15 mm thick, secure the plaster luminaire with the adjustable brackets supplied and fill the joint. The luminaire needs 55 mm of depth behind the wall.
-
Light source
Integrated LED, 62 lm at 3000K
1W, CRI 80, rated life 25000h. The LED is supplied with a constant current of 350 mA; the driver is not in the box and determines whether the assembly dims. The light leaves through a 165 × 45 mm opening.
-
Finish
Paintable plaster, 245 × 110 × 55 mm
The luminaire is untreated white plaster and is painted together with the wall. For dry indoor areas; the luminaire comes with a 5-year warranty.
Application
Plaster recessed wall light for hollow walls
The Ziggy is intended for dry indoor areas, not for bathrooms and not for outdoor use. The luminaire must not be covered with thermal insulation.
The driver is not in the box. Provide a constant-current LED driver of 350 mA, suitable for 1W; it also determines whether and how the assembly dims.
In the box
Scope of supply, per unit.
Included
- Fixture
- Light source
- Mounting bracket
- Mounting hardware
- Manual
Not included
- LED driver
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Recessed depth
- 55 mm
- Recessed width
- 113 mm
- Recessed length
- 248 mm
- Dimensions
- H 24.5 × W 11.0 cm
- Recessed thickness (ceiling/wall)
- 9-15 mm
General & Mounting
- Article number
- 10W1RE011P3
- Indoor / outdoor
- Interior
- Fixation (method)
- Recessed
- IP rating
- IP20
- Mounting (location)
- Wall
- Wall type
- Hollow (plasterboard)
- Adjustability
- Fixed
- Appliance class
- Class II (double insulated)
- Number of light points
- 1
Light
- Total wattage
- 1 W
- Socket type
- Integrated LED
- LED lifetime
- 25000 h
- Light source
- LED
- Efficacy (lm/W)
- 62
- Color mode
- White
- Light color
- 3000K
- Color rendering (CRI)
- 80
- Light output
- 62 lm
Electrical & Safety
- Dimmable
- Yes
- Power source
- Mains (corded)
- Dim technology
- Driver-dependent
- Driver current
- 350 mA
- Light source replaceability
- Not replaceable
Colour, Material & Finish
- Finish
- Unfinished (paintable)
- Material
- Gypsum / plaster
- Colour
- White
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
What cut-out does the Ziggy need?
A 248 × 113 mm cut-out in a hollow wall 9 to 15 mm thick, with 55 mm of depth behind the wall. The Ziggy is secured with the adjustable brackets supplied; the joint is then filled.
Which driver does the Ziggy need?
A constant-current LED driver of 350 mA, suitable for 1W. The driver is not included. To dim the Ziggy, choose a dimmable driver.
Can the Ziggy be painted?
Yes. The Ziggy is made of untreated plaster and is supplied to be painted together with the wall.
Can the Ziggy be used in a bathroom or outdoors?
No. The Ziggy is intended for dry indoor areas only.
Documents
Datasheet and installation manual, free to download.