- Products ...
- Collections
- Clickfit
Clickfit
GU10 recessed spotlights for five cut-out sizes, from Ø45 to Ø92 mm, most of them also available surface-mounted.
GU10 recessed spotlights for five cut-out sizes, from Ø45 to Ø92 mm, most of them also available surface-mounted. You choose the LED lamp or LED module: it clicks into the luminaire and is not supplied. Every luminaire is rated for a maximum of 35W, connects directly to 230V mains and is Class II.
Smooth and Deep come in three sizes: Small for a Ø45-47 mm cut-out and a 35 mm lamp (MR11), Medium for Ø65-70 mm and Large for Ø79-81 mm, both for a 50 mm lamp (PAR16). In the Deep, the lamp is deep-set. Each size is also available in IP54, suitable for bathroom zone 2.
The Cave has a ring projecting 9 or 10 mm below the ceiling and a deep-set light source, in Medium (Ø65-70 mm, also in IP54) and Large (Ø79-81 mm). For a Ø80 mm cut-out there are the Smooth Adjustable, which tilts up to 30°, and the Rim, with a Core in Deep, Flat or Smooth. The Trimless, for Ø92 mm, is plastered in and has no visible trim.
Smooth, Deep and Cave are also available as surface-mounted spotlights in an aluminium cylinder, with no cut-out in the ceiling. All in powder-coated aluminium, in black and white; several versions also in bronze, gold or silver.
Frequently asked questions
Which lamp fits a Clickfit recessed spotlight?
A GU10 LED lamp or an LED module, which is not supplied. Smooth Small and Deep Small are designed for a lamp with a 35 mm reflector diameter, the size the trade calls MR11. For Medium, Large, Adjustable, Rim and Trimless it is 50 mm (PAR16). Every Clickfit is also designed for an LED module with a GU10 connection. Lamp and module click into the luminaire. Every Clickfit luminaire is rated for a maximum of 35W.
Which cut-out do I need?
Ø45-47 mm for Smooth Small and Deep Small, Ø65-70 mm for Smooth Medium, Deep Medium and Cave Medium, Ø79-81 mm for Smooth Large, Deep Large and Cave Large, Ø80 mm for the Smooth Adjustable and the Rim, and Ø92 mm for the Trimless, which is plastered in. Except for the Trimless, leaf springs hold the spotlight behind a solid or hollow ceiling board.
How much recess depth do I need?
That depends on the lamp or LED module you choose, so check that there is enough space above the ceiling. For the Smooth Small it is 90 mm, measured with the lamp fitted.
Can Clickfit be used in a bathroom?
The IP54 versions of Smooth and Deep, in Small, Medium and Large, and the Cave Medium IP54 are protected against dust and splashing water, which makes them suitable for bathroom zone 2 and sheltered outdoor areas; the same goes for the IP54 surface-mounted downlights. Above the bath or shower rim, zone 1 applies, with stricter requirements — check that against the local wiring rules before you install. The standard versions are intended for dry indoor spaces.
Can I mount a Clickfit on the ceiling without a cut-out?
Yes. Smooth (Small, Medium, Large and Adjustable), Deep (Small, Medium and Large) and Cave (Medium and Large) are available as surface-mounted downlights: the recessed spotlight in an aluminium cylinder that twists onto a mounting plate fixed to the ceiling. The cylinders are also sold on their own, with mounting plate and instructions; the recessed spotlight is then ordered separately.