Features
-
Joint
Three tracks in a T
T piece of 172 × 103.5 × 18 mm with three track heads. Earth left or right tells along which side the earth conductor enters the branch; the connection diagram in the manual shows both.
-
Compatibility
For the A-Track 1-phase track
Made for the A-Track 1.5 m 1-Phase Track profile; it does not fit a 3-phase track or an A-Line track. Installation is shown in the manual of the A-Track 1-phase track system. Class I, for dry indoor areas, to be connected in line with the applicable wiring regulations.
-
Version
Black, earth left, 172 × 103.5 × 18 mm
Plastic, black. 5-year warranty. The same connector comes in white.
Application
T connector for the A-Track 1-phase track, black, earth left
The T connector branches the run in three directions. Installation is shown in the manual of the A-Track 1-phase track system.
A 1-phase track has one 230V circuit: all spots on the run switch together. Class I, for dry indoor areas, to be connected in line with the applicable wiring regulations.
In the box
Scope of supply, per unit.
Included
- Connector
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Dimensions
- L 172 × W 103.5 × H 18 mm
General & Mounting
- Article number
- T01A4TCL10B
- Mounts onto
- Track
- Indoor / outdoor
- Interior
- Appliance class
- Class I (earthed)
- IP rating
- IP20
Electrical & Safety
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Plastic
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
How do you install the A-Track 1-Phase T Connector?
The installation of the A-Track 1-Phase T Connector is shown in the manual of the A-Track 1-phase track system, also on this product page. The three track heads each slide into a track end and are screwed tight. Switch off the mains before starting; the connection must comply with the applicable wiring regulations.
What is in the box of the A-Track 1-Phase T Connector?
The A-Track 1-Phase T Connector itself. Tracks and spots are ordered separately. The A-Track 1-Phase T Connector connects to 230V and is Class I; indoor use only.
Which version of the A-Track 1-Phase T Connector do you need?
It depends on the side on which the earth conductor enters the branch: left or right. The red line on the connection diagram in the manual shows the path of the earth conductor. Both versions are reversible: unscrew the cover and turn the T piece so that the earth conductor lies on the correct side.
Are the black and the white versions of the A-Track 1-Phase T Connector technically identical?
Yes. Both versions have the same dimensions and the same connection; only the colour differs.
Accessories
Parts that go with this fixture.
![[T01C315011B] A-Track 1.5 m 1-Phase Track profile (Black)](/web/image/product.product/161/image_128)
Documents
Datasheet and installation manual, free to download.