Features
-
Finish
Powder-coated aluminium in black
Ceiling rose, arm and tube are powder-coated aluminium in black. The white version has the same dimensions and the same mounting. 5-year warranty.
-
Light
Extra warm white 2700K, 644 lm, CRI 90
Integrated 10W LED, 64.4 lm/W, 36° beam, energy class G. Dimmable with a TRIAC dimmer. Not replaceable, rated life 40000h.
-
Installation
Ø67 mm ceiling rose, no cut-out
The rose is screwed onto the ceiling and is 22 mm deep; below it hangs the Ø50 × 125 mm tube, 160 mm high in total. The spot rotates 350° and tilts 90°. The driver is built in, and the luminaire connects directly to 230V mains.
Application
Surface spot Ø50 mm, black, extra warm white 2700K
This version delivers 644 lm at 2700K with CRI 90; the 3000K version delivers 648 lm, also at CRI 90. Both have the same 36° beam and draw 10W.
The spot is Class II, for dry indoor spaces only. It must not be covered with insulating material.
In the box
Scope of supply, per unit.
Included
- Fixture
- Light source
- LED driver
- Mounting hardware
- Manual
Specifications
Measurements are nominal. Check the dimensioned drawing before cutting.
Dimensions & Recessed Fit
- Mounting plate dimensions
- Ø67 × D 22 mm
- Dimensions
- Ø67 × H 160 mm
General & Mounting
- Indoor / outdoor
- Interior
- Appliance class
- Class II (double insulated)
- Mounting (location)
- Ceiling
- Fixation (method)
- Surface
- IP rating
- IP20
- Number of light points
- 1
- Adjustability
- Adjustable
Light
- Efficacy (lm/W)
- 64.4
- Light color
- 2700K
- Color rendering (CRI)
- 90
- Light output
- 644 lm
- Color mode
- White
- Socket type
- Integrated LED
- LED lifetime
- 40000 h
- Light source
- LED
- Beam angle
- 36°
- Total wattage
- 10 W
Electrical & Safety
- Light source replaceability
- Not replaceable
- Dim technology
- Phase-cut leading-edge (TRIAC), Phase-cut trailing-edge (ELV)
- Power source
- Mains (corded)
- Dimmable
- Yes
- Input voltage
- 230 V
Colour, Material & Finish
- Colour
- Black
- Material
- Aluminium
- Finish
- Powder coated
Energy label
The EU energy label and product information sheet of the light source.
Frequently asked questions
Questions we are regularly asked about this fixture and its variants.
How is the Tuup Surface-mounted spotlight installed?
The Ø67 mm round ceiling rose is screwed onto the ceiling over the existing 230V connection point; nothing has to be cut out of the ceiling. The luminaire is Class II, so no earth connection is needed. Below the rose hangs the Ø50 mm tube; the overall height is 160 mm.
Is the spot dimmable?
Yes. The driver is built into the luminaire, which connects directly to 230V mains, and works with phase-cut dimmers, leading-edge (TRIAC) as well as trailing-edge.
Is the LED replaceable?
No. The LED is integrated and not replaceable; its rated life is 40000h. At the end of it the whole luminaire is replaced.
Can the spot be used in a bathroom or outdoors?
No. The spot is not protected against water. It is intended for dry indoor spaces only.
Is the black 2700K version as bright as the white one?
Yes. According to the EPREL product information sheet, both colours deliver 644 lm at 2700K at 10W. The housing colour makes no difference.
Accessories
Parts that go with this fixture.
![[05A0REF00G] Tuup Insert](/web/image/product.product/564/image_128)
Documents
Datasheet and installation manual, free to download.